AudioEngine A5+ Wireless Speaker System ลำโพงไร้สาย รองรับ Bluetooth 5.0 aptX HD 24-bits Upsampled

The A5+ premium powered speakers are a complete home music system with bold stereo sound that fills any room. Connect in seconds and stream your music from any app or device via high-definition Bluetooth.

The ultimate wireless music system that seamlessly works with all your apps, music, and devices. No matter how you listen, Audioengine A5+ Wireless has you covered.

Tidal, Spotify, Pandora…all your favorite streaming apps play instantly.

Benefits Small speakers with a big sound to fill any room Custom aramid fiber woofers and silk tweeters High-fidelity Premium Bluetooth® aptX®-HD Built-in power amps wrapped in hand-built wood cabinets No network setup, no passwords, no hassle

The A5+ Wireless Speakers are bookshelf speakers packing a big sound that fills any room. No network setup, passwords to enter, or buttons to push. Setting them up is so easy you’ll be rocking in no time. Keep your music fun, easy, and sounding great.

Clear, full and powerful audio that fills any room. The Audioengine A5+ Wireless Speakers are constructed with custom Audioengine components: aramid fiber woofers, silk tweeters, high-fidelity Premium Bluetooth aptX-HD, and built-in power amps wrapped in precision tuned, hand-crafted cabinets. Perfect for any size space.

Audioengine wireless speakers are special. Their traditional analog amplifiers sound incredible compared to lower-cost digital amps found in other mass-produced brands. A whole new music experience, guaranteed.

• GENERAL SPECIFICATIONS

  Power Output
  150W peak power total (50W RMS / 75W peak per channel), AES

  Inputs
  3.5mm stereo mini-jack, RCA L/R

  Input Voltages
  115/240V, 50/60Hz manually switchable

  Amplifier Type
  Dual Class AB monolithic

  Drivers
  5″ aramid fiber woofers, 3/4″ silk dome tweeters

  SNR
  >95dB (typical A-weighted)

  THD+N
  <0.05% at all power settings

  Crosstalk
  -50dB

  Frequency response
  50Hz-22kHz +/-1.5dB

  Input impedance
  10K ohms unbalanced

  Protection
  Output current limiting, thermal over-temperature, power on/off transient protection, replaceable external main fuse

  Power Consumption
  Idle: 10W
  Mute: 6W
  Sleep: 4W

• BLUETOOTH SPECIFICATIONS

  Internal D/A converter
  AKM AK4396

  Input bit depth
  24-bits upsampled

  Bluetooth receiver type
  Bluetooth 5.0 audio

  Supported codecs
  aptX HD, aptX, AAC, SBC

  Wireless operation range
  Up to 100ft (30m) typical

  Input data rate
  Determined by Bluetooth

  Wireless latency
  ~30 milliseconds (ms)

• WEIGHTS AND MEASURES

  Dimensions (each speaker HWD)
  Left – 10.75″ (27cm) x 7″ (18cm) x 9″ (23cm)
  Right – 10.75″ (27cm) x 7″ (18cm) x 7.75″ (20cm)

  Weight (LEFT speaker)
  15.4 lbs (7 kg)

  Weight (RIGHT speaker)
  9.6 lbs (4.4 kg)

  Shipping weight
  31 lbs (14 kg)

  Shipping box dims
  15″ (38cm) x 22″ (56cm) x 11.5″ (29cm)

• FINISH OPTIONS

  Satin Black Paint
  Hi-Gloss White Paint
  Solid Carbonized Bamboo

• ENVIRONMENTAL REQUIREMENTS

  Operating temperature: 32 degrees F to 95 degrees F
  Non-operating temperature: -4 degrees F to 113 degrees F
  Relative humidity: 5% to 95% non-condensing

• MATERIALS AND CONSTRUCTION

  1/2″ (13mm) thick MDF cabinets
  5″ (130mm) aramid fiber woofers with advanced voice coils
  3/4″ (20mm) silk dome tweeters with neodymium magnets
  Toroidal power transformer

• INCLUDED ACCESSORIES

  (1) Remote control
  (1) Antenna
  (1) Speaker wire (16AWG), 4 meters (~13ft)
  (1) Detachable AC power cord
  (1) Mini-jack audio cable, 2 meters (~6.5ft)
  (1) RCA audio cable, 2 meters (~6.5ft)
  (2) Microfiber speaker bags
  (1) Microfiber cable bag
  (1) Quickstart guide
  (1) Product line brochure

• CUSTOM BUILT

  Audioengine designs and manufactures our own tweeters, woofers, and other critical components. In other words, these are not box built speakers with off-the-shelf parts but custom-designed to our specifications. What we do not fabricate directly in our factory we have made to our designs (parts such as transformers, magnets, and wiring harnesses, for example). The cabinets, drivers, bass port designs, amplifiers, and crossovers are all painstakingly tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires much less power than passive speakers and a separate integrated amplifier or similar A/V components.

• DRIVERS

  Audioengine uses audiophile-quality, ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The woofers are aramid fiber woven glass composite with rubber surrounds. Aramid fiber is obviously very strong, which means that the woofer retains its shape when being driven at high levels. The speaker materials and construction are robust enough to stand up to some serious thrashing, so speaker grills are not needed and they will sound and look great after many years of use.

• POWER AMPLIFIERS

  The amplifiers in Audioengine speakers are located in the left speaker and are a conservatively rated analog design. All components are tuned together for each model, which provides a much more efficient system requiring less power than passive speakers and separate amplifiers. Circuit boards for the power and preamp sections are mounted for maximum mechanical shock protection.

• POWER TRANSFORMERS

  Power transformers are a large contributor to the overall audio performance, especially in the low end. Again, no off-the-shelf parts. Audioengine uses gapless core toroidal transformers which have a tighter radiated magnetic field, directly translating to lower noise. They are lighter than standard, lower-cost transformers and also generate less heat.

• SHIELDING

  Both drivers are directly video shielded and allow the user to place the speakers within a few inches of a video monitor. This shielding also offers protection for hard-drive digital music players.