Audioengine HD6 ลำโพงไร้สาย Wireless Speaker System รองรับ Bluetooth 5.0 aptX HD
เลือกออปชั่นเพื่อดูสต๊อกสินค้า
29,900 ฿
- ลำโพงไร้สาย Wireless Speaker System
- ไดรเวอร์แบบ Woofer Driver Kevlar ขนาด 5.5″ Silk Dome Twitter ขนาด 1 นิ้ว จะปรับตำแหน่งมาอยู่ตรงกลางของลำโพง
- ชิปเซ็ต Bluetooth จาก AKM AK4396
- รองรับ Bluetooth 5.0 Codec : aptX HD, aptX low latency, aptX, AAC, SBC
- รองรับ 24-Bit แบบ Upsampling 192kHz
- รองรับช่วงความถี่ 50Hz – 22kHz
- กำลังขับ 50W สูงสุด 75W ต่อ 1 ข้าง รวมกำลังขับสูงสุด 150W
- ให้รายละเอียดและมิติเสียงที่ดีเยี่ยม สามารถใช้แทนลำโพงบ้านได้
- รองรับ Input แบบ 3.5mm mini-jack, RCA L/R, digital optical (SPDIF,) Bluetooth aptX
- รองรับ Output แบบ Variable line-out w/2.0V RMS max output, 47ohm output impedance
- รับ – ส่งสัญญาณได้ไกลสูงสุดถึง 30 เมตร
- ในตัวมี Active Amp 2.0 แอมป์ภายในตัวลำโพง
- ในชุดมีรีโหมดคอรโทรลำโพงในตัว
Our flagship HD6 premium powered speakers are a complete home music system with bold stereo sound that fills any room. Connect in seconds and stream your music from any app or device via high-definition Bluetooth.
HD6 Wireless Speakers are not just another great-sounding Audioengine speaker but a complete, full sized Bluetooth music system that works with all your apps, music, and devices. Blending the best of the past and present, HD6 combines stunning good looks with truly-useful features.
Tidal, Spotify, Pandora…all your favorite streaming apps play instantly.
No matter how you listen, HD6 Wireless Speakers have you covered.
- Perfect for TV sound
- Wireless that works with all your devices and apps
- No network setup, no passwords, no hassle
- High-end sound wrapped in hand-built wood cabinets
- Simple setup, no receiver needed
- Optical audio input
- Advanced wireless
- Subwoofer connection
- Solid metal remote control
The HD6 Wireless Speakers are versatile Bluetooth speakers packing a big sound that fills any room. Turntable? TV? No problem, we have you covered.
No network setup, passwords to enter, or buttons to push. Setting them up is so easy you’ll be rocking in no time.
Keep your music fun, easy, and sounding great.
Clear, full and powerful sound that fills any room.
The HD6 Wireless Speakers are constructed with custom Audioengine components: aramid fiber woofers, silk tweeters, high-fidelity Bluetooth aptX-HD, and built-in power amps wrapped in precision tuned, hand-crafted cabinets. These speakers are designed as a main TV room system but are versatile enough to fit into any space.
Audioengine wireless speakers are special. Their traditional analog amplifiers sound incredible compared to lower-cost digital amps found in other mass-produced brands.
A whole new audio experience, guaranteed.
-
GENERAL SPECIFICATIONS
Speaker type
2.0 powered bookshelf-style speaker system featuring wireless and digital optical inputsPower output
150W peak power total (50W RMS, 75W peak per channel)Inputs
3.5mm mini-jack, RCA L/R, digital optical (SPDIF,) Bluetooth aptXOutputs
Variable line-out w/2.0V RMS max output, 47ohm output impedanceInput voltages
115/240V, 50/60Hz manually-switchableAmplifier type
Analog dual-class A/B monolithicDrivers
5.5″ aramid fiber woofers, 1″ silk dome tweetersSNR
>95dB (typical A-weighted)THD+N
<0.05% at all power settingsCrosstalk
-50dBFrequency response
50Hz-22kHz +/-1.5dBAnalog input impedance
48Kohms unbalanced (mini-jack and RCA inputs)Protection
Output current limiting, thermal over-temperature, power on/off transient protection, replaceable external main fusePower consumption
Idle: 10W
Mute: 6W
Sleep: 4W -
BLUETOOTH SPECIFICATIONS
Internal D/A converter
AKM AK4396Input bit depth
24-bits upsampledBluetooth receiver type
Bluetooth 5.0 audioSupported codecs
aptX HD, aptX low latency, aptX, AAC, SBCWireless operation range
Up to 100ft (30m) typicalInput data rate
Determined by BluetoothWireless latency
~30 milliseconds (ms) -
OPTICAL SPECIFICATIONS
Internal D/A converter
AKM AK4396Input bit depth
up to 24-bits nativeInput data rate
up to 192KS/s native -
WEIGHTS AND MEASURES
Left speaker (powered)
Dimensions: 11.75″ (30cm) x 7.25″ (18.5cm) x 10″ (25cm)
Weight: 17.5 lbs (8kg)Right speaker (passive)
Dimensions: 11.75″ (30cm) x 7.25″ (18.5cm) x 10″ (25cm)
Weight: 12.5 lbs (5.5kg)Shipping weight
15kg / 33.5 lbs per pairShipping box dimensions
17″ (43cm) x 20″ (51cm) x 15″ (38cm) -
ENVIRONMENTAL REQUIREMENTS
Operating temperature: 32 degrees F to 95 degrees F
Non-operating temperature: -4 degrees F to 113 degrees F
Relative humidity: 5% to 95% non-condensing -
CUSTOM COMPONENTS
Audioengine designs and manufactures our own speaker drivers and other critical components. In other words, HD6 is not a box-built system with off-the-shelf parts, but includes custom-designed components constructed to our specifications. What we do not fabricate directly inside our factories we made to our specific designs parts such as circuit boards, transformers, magnets, and wiring harnesses, for example.
-
EFFICIENT INTEGRATED DESIGN
The speaker cabinets, drivers, innovative bass port designs, amplifiers, and passive crossovers are all critically tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components. We build all this goodness into the left speaker cabinet to make it super-easy to connect your smartphone, tablet, computer, TV, network player or any other audio product.
-
BUILT-IN B1 AND D1
We have taken features from two of our best-selling products, the B1 aptX HD Bluetooth Receiver and the D1 24-bit DAC, and combined some of this circuitry with advanced speaker components to achieve a complete high-end analog and digital audio system.
-
HIGH-QUALITY BLUETOOTH AUDIO
The Bluetooth built into the HD6 powered speakers features aptX HD coding which is an advanced Bluetooth audio codec with very impressive sound. And even if your phone or tablet does not have aptX HD, the HD6 Bluetooth solution is backwards-compatible with SBC and AAC codecs, as well as standard aptX, so you can wirelessly stream music from any Bluetooth-enabled device and still enjoy all your music. High-fidelity Bluetooth aptX HD that really works and sounds great. Here is why:
Extended wireless range
Most Bluetooth implementations have very limited range, typically within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that has up to 3 times the range of standard Bluetooth for multi-room use, with no degradation in audio quality.24-bit DAC
The HD6 include an AKM AK4396A DAC, widely known for its low-noise and high-fidelity. The optical input configures the AK4396A as a bit-perfect 24-bit DAC, which will process sample rates up to 192kHz natively. But for Bluetooth the AK4396A is used as an upsampling DAC and will pad all bit depths to 24-bits, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the AK4396A, the fact that digital signal is upsampled to 24-bits as well as the added benefit of onboard triple redundancy power source conversion and filtering, the HD6 Bluetooth implementation presents impressive low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices. -
FURNITURE-GRADE FINISHES
HD6 cabinets are available in several handsome finishes, including walnut and cherry veneers as well as satin black and high-gloss white paint, offering a myriad of options for complementing room furnishings. Also included are detachable grills that add further aesthetic advantages as they are firmly held in place with hidden neodymium magnets for a clean look.
-
AMPLIFIER DESIGN
The amplifiers in powered Audioengine speakers are located in the left speaker and are a conservatively-rated class A/B analog monoblock design. This is a more traditional speaker/amplifier marriage which provides excellent quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for maximum mechanical shock protection.
-
DRIVER DESIGNS
Audioengine uses audiophile-quality, ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The woofers are aramid fiber woven glass composite with rubber surrounds. Aramid fiber is obviously very strong, which means the woofer retains its shape when being driven at high levels. The HD6 woofers are housed in cast aluminum frames which provide high rigidity and increased heat dispersion.
-
POWER TRANSFORMERS
Power transformers are critical to to high-quality audio performance, especially in the low-end and again, no off-the-shelf parts. Audioengine uses gapless core toroidal transformers which have a tighter radiated magnetic field, translating to lower noise. They are lighter than standard, lower-cost transformers and also generate less heat.
-
SHIELDING
Each of the HD6’s speaker drivers are directly magnetically-shielded.
สี | |
---|---|
ระยะเวลาเตรียมสินค้า | 20-30 วัน |
ช่องทางการขาย |
You must be logged in to post a review.
สินค้าที่คล้ายกัน
-
Klipsch The Sixes ลำโพงบลูทูธ Bookshelf 70W aptX | 3.5mm | Pre-Amp | RCA | USB | Optical
37,900 ฿- Powered Bookshelf Speakers ลำโพงตั้งบนชั้นวาง
- รองรับช่วงความถี่ 40 Hz ~20 kHz @ -3dB
- กำลังขับสูงสุด 200 วัตถ์ ต่อลำโพง 1 ตัว
- ไดรเวอร์ทวีตเตอร์ไททาเนียมขนาด 1” พร้อม Tractrix Horns
- ไดรเวอร์วูฟเฟอร์ขนาด 6.5” พร้อมโครงแบบมีพอร์ต
- รองรับอินพุตระดับโฟโน RCA 1 คู่พร้อมสวิตช์สำหรับความสามารถในการป้อนข้อมูล Phono / Line (Phono Pre-amp พร้อมขั้วต่อสกรูกราวด์)
- รองรับเทคโนโลยีไร้สาย Bluetooth® aptX
- รองรับเชื่อมต่อเครื่อเล่นแผ่นเสียง
- รองรับการเชื่อมต่อ Input 3.5mm Mini-Plug (Analog), Phono Pre-Amp / RCA Analog, USB Type B, Optical ,พร้อมขั้วต่อสกรูกราวด์
- รองรับการเชื่อมต่อ Output Subwoofer ภายนอกได้
- มาพร้อมรีโมทควบคุมไร้สาย
-
Klipsch Heritage Groove ลำโพงไร้สาย ทำจากไม้แท้ รองรับ Bluetooth AUX
5,990 ฿Matt BlackMatt BlackWalnutWalnut- ลำโพงไร้สาย Hi-End Bluetooth Speaker
- ลำโพงทำจากไม้แท้ ช่วยในเรื่องของการลดเสียงรบกวนที่อาจะเกิดขึ้นได้
- รูปทรงออกแบบที่สุดคลาสสิคแบบ Mid-Century รูปทรงสี่เหลี่ยมผืนผ้า โดยรอบหุ้มด้วยผ้าคุณภาพสูง
- ไดรเวอร์แบบ Full-Range ขนาด 3 นิ้ว เสริมด้วย Passive Radiator
- ประกบไดรเวอร์ทั้งฝั่งซ้ายและขวาทั้ง 2 ด้านกำลังขับสูงสุด 20 วัตต์
- ปุ่มควบคุมทั้งหมด 6 ปุ่ม ได้แก่ ปุ่มเปิด/ปิด, ปุ่ม Bluetooth Pairing, ปุ่ม AUX input, ปุ่มเล่น/หยุด/รับสาย, ปุ่มลดเสียง/ปุ่มเพิ่มเสียง
- ในตัวมี Speaker Phone สามารถใช้งานสื่อสารโทรศัพท์ได้
- รองรับการเชื่อมต่อ Bluetooth และ AUX Input
- ใช้งานได้ต่อเนื่องนาน 8 ชั่วโมง
ชาร์จผ่านช่อง Micro-USB ใช้เวลาทั้งหมด 2 ชั่วโมง ต่อการชาร์ต 1 ครั้ง
-
DALI OPTICON 8 MK2 ลำโพงตั้งพื้น Floor-Standing ระบบ Hi-Fi และ Home Cinema
119,900 ฿Satin BlackSatin Black- ลำโพงตั้งพื้น Floor-Standing ขนาดใหญ่ รองรับระบบ Hi-Fi และ Home Cinema
- ออกแบบลำโพงให้มีความร่วมสมัย ตู้ลำโพงขึ้นรูปจาก MDF ปิดผิวด้วยลายไม้ไวนิลเกรดดี
- หน้ากากลำโพงทำจากโครงพลาสติกหุ้มผ้าโปร่งเสียง
- ไฮบริดทวีตเตอร์ Soft Dome ขนาด 29 มิลลิเมตร และ ไฮบริดทวีตเตอร์แบบริบบิ้นขนาด 17 × 45 มิลลิเมตร รวมเอารายละเอียดการควบคุมการกระจายเพื่อการส่งความถี่สูงที่เหมาะสมที่สุด
- ทำงานที่ความถี่ 380 / 2,200 / 14,000 Hz
- ตัวขับเสียงเบส Bass / Midrange ขนาด 6 1/2″ ไดอะแฟรมทำจากเยื่อไม้สีแดง
- ตัวขับ Woofer ขนาด 8″ 2 ตัว ไดอะแฟรมทำจากเยื่อไม้สีแดง
- เทคโนโลยี SMC อันเป็นสิทธิบัตรเฉพาะของ DALI จึงสามารถลดความผิดเพี้ยนของเสียงประเภท Non-Linear Magnetic Distortion
- ระบบสะท้อนเสียงเบสพร้อมท่อสะท้อนแสงแบบ Dual Flare แบบพิเศษ มีรูปร่างเหมือนกรวยที่ปลายทั้งสองข้าง
- รองรับช่วงความถี่ตั้งแต่ 38 – 30,000 Hz
- ใช้กับแอมป์ที่มีกำลังขับตั้งแต่ 40 – 300 วัตต์
- ขนาดลำโพง 1141 x 241 x 450 มิลลิเมตร น้ำหนักข้างละ 34 กิโลกรัม
- ขั้วต่อสายลำโพงแบบ Bi-wiring / bi-amping
-
Dali Oberon 3 ลำโพง Bookshelf 150W สำหรับตั้งโต๊ะ หรือตั้งบนชั้นวางหนังสือ
23,900 ฿- Bookshelf Speaker ลำโพงตั้งโต๊ะ หรือตั้งบนที่วางหนังสือ
- ออกแบบลำโพงให้มีความร่วมสมัย ตู้ลำโพงขึ้นรูปจาก MDF ปิดผิวด้วยลายไม้ไวนิลเกรดดี
- หน้ากากลำโพงทำจากโครงพลาสติกหุ้มผ้าโปร่งเสียง
- ทวีตเตอร์โดมผ้าขนาด 29 มิลลิเมตร น้ำหนักเบา ทำงานตั้งแต่ความถี่ 2,400 Hz (ความถี่ครอสโอเวอร์) ไปจนถึง 26,000 Hz
- สำโพง Woofer ขนาด 7 นิ้ว ไดอะแฟรมทำจากเยื่อไม้
- เทคโนโลยี SMC อันเป็นสิทธิบัตรเฉพาะของ DALI จึงสามารถลดความผิดเพี้ยนของเสียงประเภท Non-Linear Magnetic Distortion
- รองรับช่วงความถี่ตั้งแต่ 47 Hz – 26,000 Hz
- ใช้กับแอมป์ที่มีกำลังขับตั้งแต่ 25 – 150 วัตต์
- ขนาดลำโพง 350 x 200 x 315 มิลลิเมตร น้ำหนักข้างละ 6.3 กิโลกรัม
- ขั้วต่อสายลำโพงแบบซิงเกิลไวร์
รีวิว
ยังไม่มีบทวิจารณ์